Name: Disconnecting Switch GW7-252 series outdoor High voltage From Jucro Electric
Brand: JUCRO
SKU: 18195116
Rating: 4.75 (10 reviews)

Language:

English

HUBEI JUCRO ELECTRIC Co.,Ltd

Home / All / Electrical equipment / Isolation switch /

Disconnecting Switch GW7-252 series outdoor High voltage From Jucro Electric

Categories	Isolation switch
Brand	JUCRO
Model	GW7-252
FOB port	SHANGHAI OR NINGBO
Terms of Payment	L/C, Western Union, MoneyGram, T/T
Update Time	Dec 21,2024

Contact Now

Favorites

Detail Information

Disconnecting Switch GW7-252 series outdoor HV From Jucro Electric

GW7-252 series outdoor HV disconnecting isolation switch for the three-pillar structure of the level of open, from the base, pillar insulation, conductive system, earthing switch(except the non-grounded) and the transmission system composed of chief surgeon with CJ6 electric sector.

Base and steel plates welded together by the channel. In the channel is equipped with two bearing and a bearing seat, stay with adjustable suspension at both ends of supports for the structure, can continuously adjust the height of the pillars insulator to ensure that finger-touch access to the best position. Bearing installed in the channel middle axis moves the operating rod can be driven to achieve sub-moving touch closing action. Bearing the seal structure to prevent dust, moisture, harmful gases into the card bearing caused by internal phenomenon; bearing thrust ball bearing and the inside is equipped with ball bearing to the heart, the isolating switch and the horizontal component of gravity by two kinds of special bearing and responsibilities so that isolating switch operation after long-running torque will not increase. Stainless steel shaft pin, and self-lubricating bushings; molybdenum disulfide lubricant for high performance lithium-based grease.

Cavity equipped with a transmission link in the channel and the interlocking panels. Channel under the welding plate is installed so that the basis of fixed and on-site. Base there is no grounding, single-ground, double grounding of three. Single grounding and grounding base pairs at one end or both ends of the grounding switch bearings, bearing equipped with a grounding switch.

In the upper end of pillar insulator, composed of the direct contact guillotine and static composition. Knife from the two copper conductive composition, its end has a cylindrical contact of all welded, with the help of copper and aluminum cover clip blocks facilitate the integration between the two tubes. Static contact to mean a multi-point contact forms, each piece has a separate right touch of spring, there is enough to guarantee selection into the pillars at both ends of the role of insulators in the bus pull still guarantee a reliable contact. Static contact under the action of the reset spring deflection angle to facilitate the points, closing light motor coordination.

Outline and mounting dimension

The main parameters

Item			Unit	Parameters
The product model				GW7-72.5	GW7-145	GW7-252
Rated voltage			KV	72.5	145	252
Rated insulation level	1min power frequency withstand voltage(effective value)	On the groud	KV	160	160	230
		Fracture		200	200	230+70
	Rated lightning impluse withstand current(peak)	On the groud		350	650	1050
		Fracture		410	650(+120)	1050+(+200)
	Grouding switch of the shortest distance in the process of closing			84	164	291
Rated Frequency			Hz	50/60
Rated Current			A	1250、2000、2500 3150、4000	1250/2000	2000/2500、3150 4000、5000
Rated short-time withstand current			KA	40/50	31.5/40	50/63
Rated peak withstand current			KA	100/125	80/100	125/60
Rated short circuit duration			S	4		3
Rated mechanical terminal load	Horizontal and vertical		N	750/1000	1250	1000
	Horizontal			500/750	750	750
	vertical force			750	1000	1250
Isolating switch, bus transfer current switching capability				100V、1600A 100 times	100V、1600A 100 times	100V、1600A 100times
Grounding switch induction current Switching capability	Electromagnetic induction current(current/voltage)		A/KV	100/4(80/2)	100/6(80/20)	160/15(3/12)
	Electrostatic induction current(current/voltage)		A/KV	2/6	5/6(2/6)	10/15(3/2)
	The opening and closing times		times	10
Isolating switch low current switching capability	The capacitive current		A	-	1	1
	The inductor current		A	－	0.5	0.5
Creepage distance			mm	≥1813/2248	≥3625/4495	≥6300/7812
RIV Five wire electric interference level			μV	≤500
Mechanical life			Times	5000
Applicable altitude(less than)				≤2000
Motor actuator	Model			CJ
	Motor voltage		V	AC380、AC220、DC220、DC110
	Voltage control loop		V	AC380、AC220、DC220、DC110
	Points,closing times		S	7±1		16±1
	Output angle			180°		180°
Human actuator	Model			CS17
	Electromagnetic lock voltage		V	AC220、DC220、DC110

Packing & Delivery

Strong package, Safety first.

Inside with foam to support the product, put it in carton or wooden box, fixed it on pallet.

As long as possible to keep the products safe until it arriving customer's warehouse.

Clearly marking label outside of package, customers will be easy to identify their goods.

Our Company